Hi,
I've been searching the net and this forum for a fix, it seems like a few people have had the same issue as me, but either their post is unanswered or they say they've fixed it but never say how.
My phone one day went into a infinite loop of the Samsung Splash screen and I tried fixing it by googling the issue (Over 5 months ago) which may have caused more issues for my phone in the end. I remember entering recovery mode and wiping everything on the phone, then nothing I did could fix the thing.
So I just stopped touching it and left it to collect dust and used my old iPhone 3. My iPhone 3 is now broken and I've come back to my S3, so at the moment:
I can't enter recovery mode on my phone (It just won't start in recovery mode at all)
I CAN enter download mode
I've tried using ODIN (v3.09, 3.07, 1.85) and changing multiple USB ports and I was finally able to get my phone to show up on Odin.
I then downloaded the stock firmware from sammmobile website (It took forever to download) Which I made sure was the right model (GT-I9305) and Carrier (Optus, Australia)
Which is filename: I9305XXALI5_I9305OPSALI5_I9305XXALI5_HOME.tar.md5
I tried flashing that firmware with Odin (All 3 versions) [I reset the phone and Odin after every failed attempt]
and I would get this error:
That was WITHOUT having a PIT file included and also the only things ticked were 'Auto Reboot' and 'F. Reset Time'.
Then I searched all over the internet and came across this PIT Partition file
the filename is: m3xx_i9305.pit
which I then used in the PIT section of Odin WITH and WITHOUT the previously mentioned Firmware and I would then get this:
It would just sit on Get PIT for mapping for a very long time, longest I left it was an hour.
So I can't get it working that way, I also tried ADB Bootloading in the CMD prompt, but the device could never be found that way.
So after spending about 5 hours on this I'm resorting to just asking anyone on here for some help.
Thank you!
Phone Details:
Samsung Galaxy S3 GT-I9305
ODIN MODE:
Product Name: GT-I9305
Custom Binary Download: No
Current Binary: Samsung Official
System Status: Custom
Knox Warranty Void: 0
RP SWREV:
Computer Details:
Windows 8.1 Pro
Intel 2700k @ 3.5Ghz
16gb Ram
Samsung USB Drivers Installed
If there is any additional information required please let me know. This is my first time posting here, so If I did anything wrong please let me know.
Thank you.
I've been searching the net and this forum for a fix, it seems like a few people have had the same issue as me, but either their post is unanswered or they say they've fixed it but never say how.
My phone one day went into a infinite loop of the Samsung Splash screen and I tried fixing it by googling the issue (Over 5 months ago) which may have caused more issues for my phone in the end. I remember entering recovery mode and wiping everything on the phone, then nothing I did could fix the thing.
So I just stopped touching it and left it to collect dust and used my old iPhone 3. My iPhone 3 is now broken and I've come back to my S3, so at the moment:
I can't enter recovery mode on my phone (It just won't start in recovery mode at all)
I CAN enter download mode
I've tried using ODIN (v3.09, 3.07, 1.85) and changing multiple USB ports and I was finally able to get my phone to show up on Odin.
I then downloaded the stock firmware from sammmobile website (It took forever to download) Which I made sure was the right model (GT-I9305) and Carrier (Optus, Australia)
Which is filename: I9305XXALI5_I9305OPSALI5_I9305XXALI5_HOME.tar.md5
I tried flashing that firmware with Odin (All 3 versions) [I reset the phone and Odin after every failed attempt]
and I would get this error:
Quote:
<ID:0/003> Added!! <OSM> Enter CS for MD5.. <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> I9305XXALI5_I9305OPSALI5_I9305XXALI5_HOME.tar.md5 is valid. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <ID:0/003> Odin v.3 engine (ID:3).. <ID:0/003> File analysis.. <ID:0/003> SetupConnection.. <ID:0/003> Initialzation.. <ID:0/003> Get PIT for mapping.. <ID:0/003> <ID:0/003> There is no PIT partition. <OSM> All threads completed. (succeed 0 / failed 1) |
That was WITHOUT having a PIT file included and also the only things ticked were 'Auto Reboot' and 'F. Reset Time'.
Then I searched all over the internet and came across this PIT Partition file
the filename is: m3xx_i9305.pit
which I then used in the PIT section of Odin WITH and WITHOUT the previously mentioned Firmware and I would then get this:
Quote:
<ID:0/003> Added!! <OSM> Enter CS for MD5.. <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> I9305XXALI5_I9305OPSALI5_I9305XXALI5_HOME.tar.md5 is valid. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <ID:0/003> Odin v.3 engine (ID:3).. <ID:0/003> File analysis.. <ID:0/003> SetupConnection.. <ID:0/003> Initialzation.. <ID:0/003> Set PIT file.. <ID:0/003> DO NOT TURN OFF TARGET!! <ID:0/003> Get PIT for mapping.. |
It would just sit on Get PIT for mapping for a very long time, longest I left it was an hour.
So I can't get it working that way, I also tried ADB Bootloading in the CMD prompt, but the device could never be found that way.
So after spending about 5 hours on this I'm resorting to just asking anyone on here for some help.
Thank you!
Phone Details:
Samsung Galaxy S3 GT-I9305
ODIN MODE:
Product Name: GT-I9305
Custom Binary Download: No
Current Binary: Samsung Official
System Status: Custom
Knox Warranty Void: 0
RP SWREV:
Computer Details:
Windows 8.1 Pro
Intel 2700k @ 3.5Ghz
16gb Ram
Samsung USB Drivers Installed
If there is any additional information required please let me know. This is my first time posting here, so If I did anything wrong please let me know.
Thank you.
from xda-developers http://ift.tt/1Ew8PoJ
via IFTTT
Aucun commentaire:
Enregistrer un commentaire